View 19-217-W1D-CPQTY-3T_8903329.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

everlight electronics co., ltd. http://w ww.everlight.com rev 1 page: 1 of 12 device no. : prepared date: 1 - jul . - 20 11 prepared by: ch en zheng technical data sheet 0603 package chip led (0.4mm height) 19 - 217/ w 1 d - cp qt y /3t features ? package in 8mm tape on 7 diameter reel. ? compatible with automatic placement equipment. ? compatibl e with infrared and vapor phase reflow solder process. ? mono - color type. ? pb - free. ? the product itself will remain within rohs compliant version descriptions ? the 19 - 217 smd led is much smaller than lead frame type components, thus enable smaller board s ize, higher packing density, reduced storage space and finally smaller equipment to be obtained. ? besides, lightweight makes them ideal for miniature applications. etc. applications ? backlighting in dashboard and switch. ? telecommunication: indicator an d backlighting in telephone and fax. ? flat backlight for lcd, switch and symbol. ? general use. device selection guide part no. chip emitted color resin color material 19 - 217/ w 1 d - cp qt y /3t inga n pure white yellow diffused
19 - 217/ w 1 d - cpqt y/3t everlight electronics co., ltd. http://w ww.everlight.com rev 1 page: 2 of 12 device no. : prepared date: 1 - jul . - 20 11 prepared by: ch en zheng package outli ne dimensions note: the tolerances unless mentioned is 0.1mm ,unit = mm
19 - 217/ w 1 d - cpqt y/3t everlight electronics co., ltd. http://w ww.everlight.com rev 1 page: 3 of 12 device no. : prepared date: 1 - jul . - 20 11 prepared by: ch en zheng absolute maximum ratings (ta= 25 parameter symbol rating unit reverse voltage v r 5 v forward current i f 25 ma peak forward current (duty 1/10 @1khz ) i fp 100 m a power dissipation pd 95 m w electrostatic discharge (hbm) esd 150 v operating temperature topr - 40 ~ +85 storage tem perature tstg - 40 ~ +90 soldering temperature tsol reflow soldering : 260 for 10 sec. hand soldering : 350 for 3 sec . electro - optical characteristics (ta=25 parameter symbol min. typ. max. unit condition luminous intensity i v 4 5.0 ----- 112 mc d i f =5ma viewing angle 2 1/2 ----- 130 ----- deg forward voltage v f 2.6 0 ----- 3. 00 v reverse current i r ----- ----- 50 a v r = 5v notes: 1.tolerance of luminous intensity
19 - 217/ w 1 d - cpqt y/3t everlight electronics co., ltd. http://w ww.everlight.com rev 1 page: 4 of 12 device no. : prepared date: 1 - jul . - 20 11 prepared by: ch en zheng bin range of luminous intensi ty bin code min. max. unit condition p 45.0 72.0 mcd i f =5ma q 72.0 112 bin range of forward voltage symbol bin code min. max. unit condition t 28 2.60 2.70 v i f =5ma 29 2.70 2.80 30 2.80 2.90 31 2.90 3.00 notes: 1.tolerance of luminou s intensity
19 - 217/ w 1 d - cpqt y/3t everlight electronics co., ltd. http://w ww.everlight.com rev 1 page: 5 of 12 device no. : prepared date: 1 - jul . - 20 11 prepared by: ch en zheng chromaticity coordinates specifications for bin grading group bin code cie_x cie_y condition c 1 0.274 0.226 i f =5ma 0.274 0.258 0.294 0.286 0.294 0.254 2 0.274 0.258 0.274 0.291 0.294 0.319 0.294 0.286 3 0.294 0.254 0.294 0.286 0.314 0.315 0.314 0.282 4 0.294 0.286 0.294 0.319 0.314 0.347 0.314 0.315 notes: 1.the c.i.e. 1931 chromaticity diagram ( tolerance
19 - 217/ w 1 d - cpqt y/3t everlight electronics co., ltd. http://w ww.everlight.com rev 1 page: 6 of 12 device no. : prepared date: 1 - jul . - 20 11 prepared by: ch en zheng cie chromaticity diagram
19 - 217/ w 1 d - cpqt y/3t everlight electronics co., ltd. http://w ww.everlight.com rev 1 page: 7 of 12 device no. : prepared date: 1 - jul . - 20 11 prepared by: ch en zheng typical electro - optical characteristics curves
19 - 217/ w 1 d - cpqt y/3t everlight electronics co., ltd. http://w ww.everlight.com rev 1 page: 8 of 12 device no. : prepared date: 1 - jul . - 20 11 prepared by: ch en zheng label explanation cat: luminous intensity rank hue: chroma ticity coordinates ref: forward voltage rank reel dimensions note: the tolerances unless mentioned is 0.1mm ,unit = mm rohs pb cpn : p n : xxxxxxxxxxxxx xxxxxxxxxxxxx qty : xxx lot no : xxxxxxxxxx reference : xxxxxxxx cat : xxx hue : xxx ref : xxx everlight made in taiwan
19 - 217/ w 1 d - cpqt y/3t everlight electronics co., ltd. http://w ww.everlight.com rev 1 page: 9 of 12 device no. : prepared date: 1 - jul . - 20 11 prepared by: ch en zheng carrier tape dimensions: loaded quantity 3000 pcs per reel note: the tolerances un less mentioned is 0.1mm,unit = mm moisture resistant packaging label desiccant label aluminum moisture-proof bag
19 - 217/ w 1 d - cpqt y/3t everlight electronics co., ltd. http://w ww.everlight.com rev 1 page: 10 of 12 device no. : prepared date: 1 - jul . - 20 11 prepared by: ch en zheng reliability test items and conditions the reliability of products shall be satisfied with items listed below. confide nce level 90% ltpd 1 0% no. items test condition test hours/cycles sample size ac/re 1 reflow soldering temp. : 2 6 0 22 p cs. 0/1 2 temperature cycle h : + 100 22 pcs. 0/1 3 thermal shock h : + 100 22 p cs. 0/1 4 high temperature storage temp. : 100 22 p cs. 0/1 5 low temperature storage temp. : - 40 22 p cs. 0/1 6 dc operating life i f = 20 ma 1000 hrs. 22 p cs. 0/1 7 high temperature / high humidity 85 22 p cs. 0/1
19 - 217/ w 1 d - cpqt y/3t everlight electronics co., ltd. http://w ww.everlight.com rev 1 page: 11 of 12 device no. : prepared date: 1 - jul . - 20 11 prepared by: ch en zheng precautions for use 1. over - current - proof customer must apply resistors for protection , otherwise slight voltage shift will cause big current change ( burn out will happen ). 2. storage 2.1 do n ot open moisture proof bag before the products are ready to use. 2.2 before opening the package : t he leds should be kept at 30 or l ess and 90%rh or less. 2.3 after opening the package : t he led's floor life is 1 year under 30 or less and 6 0% rh or less. if unused leds remain, it should be stored in moisture proof packages. 2. 4 if the moisture absorbent material (silica gel) has faded away or the leds have exceeded the storage time, baking treatment should be performed using the following conditions. ba king treatment : 60 5 for 24 hours. 3. soldering condition 3.1 pb - free solder temperature profile 3.2 reflow soldering should not be done more than two times. 3.3 when soldering, do not put stress on the leds during heating. 3.4 after soldering, do not warp the circuit board.
19 - 217/ w 1 d - cpqt y/3t everlight electronics co., ltd. http://w ww.everlight.com rev 1 page: 12 of 12 device no. : prepared date: 1 - jul . - 20 11 prepared by: ch en zheng 4.soldering iron each terminal is to go to the tip of soldering iron temperature less tha n 35 0 for 3 seconds within once in less than the soldering iron capacity 25w. leave two se conds and more intervals, and do soldering of each terminal. be careful because the damage of the product is often started at the time of the hand solder. 5.repairing repair should not be done after the leds have been soldered. when repairing is un avoidable, a double - head soldering iron should be used (as below figure). it should be confirmed beforehand whether the characteristics of the leds will or will not be damaged by repairing. everlight electronics co., ltd. tel: 886 - 2 - 2267 - 2000, 2267 - 9936 office: no 25, lane 76, sec 3, chung yang rd, fax: 886 - 2267 - 6244, 2267 - 6189, 2267 - 6306 tucheng, taipei 236, taiwan, r.o.c http://ww w.everlight.com

▲Up To Search▲

Price & Availability of 19-217-W1D-CPQTY-3T

	To Download 19-217-W1D-CPQTY-3T Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .